RPM Polaris RZR Turbo, XPT, Turbo R, S, & PRO XP Oil Catch Can
$189.95
Description
RPM Polaris RZR Turbo Oil Catch Can
The RPM SxS Catch Can is all aluminum and fully chambered oil catch can built to provide the absolute best performance! Designed to mount directly to the bed and use the factory crankcase breather to allow for a simple and quick install! A pre filter is included to keep dust and debris free from the crankcase breather filter as well. The use of our 12-AN fitting makes installation clean and allows for easy removal for maintenance later on. Our o-ring sealed drain valve makes emptying the catch can easy and leak free during operation. This kit includes a silicone hose to replace the problematic factory crankcase hose along with all hardware needed for installation.
It's no secret that forced induction engines create an abundance of oil/gas/condensation waste. Due to emissions laws & such, this waste has to be recycled back through the engine & “burned off”. This oily mess is the “ messy film” you find caked to your charge tubes, turbo inducer blades, and inside the intercooler. Not only can these gasses and liquids create tuning headaches by skewing the air fuel ratio, they can also increase the chances of detonation ( oil & condensation do not combust well). The RPM SxS Catch Can’s job is to collect this oily mess so that it can be manually drained later on. All necessary hardware to cap off your factory breather & completely install the catch can are included!
Fits ALL models, years, and variants of the Turbo RZR
Fits all models, years, and variants of the Turbo RZR
Includes Cap For OEM Hose’s Location To Be Blocked Off on J-Tube
Share
Frankie T.
Good product
Conrad R.
Really easy install . And looks great !
David F.
Great!
Ryan K.
Fast shipping and the product looks and feels like a premium product.
Ron B.
Just got back from riding Drummin Island in the U P of Michigan and all of my R P M add ons worked awesome !!! Catch can , clutch blower , Big Fatty , Charge Tube , J Tube and pre screen for my air Filter
Phillip T.
The parts on the site were easy to find for my Razor. Received order very fast without any issues. Installed the parts with ease due to the easy to follow online videos. Will continue to look at RPM SXS site first for additional accessories for my Razor XP 4 Turbo!
Charles
High quality, easy install
Russell P.
I love the RPM catch can. Very easy to install. Works perfectly. I also run the BOV, charge tube, and J tube. Absolutely love them all
Carlos R.
Great product! Shipping was quick! Recommend this product! Well built!
Greg C.
Really nice unit. Easy install looks good on my machine. We will see how much junk I will catch in it.
Jeremy S.
Haven't been riding yet to cold for my kids to be out ripping trails. But so far pretty solid I would buy it again i can't give more on it until I put some miles on it this summer.
Jeremy
So far, it works great.
Collin
Came on time
Justin O.
Perfect fit and goes well with all the other rpm goodies !!
Chris J.
Awesome product the finishing was great got exactly what I wanted easy to install recommend for any turbo owners out there I did get the polished one to be a little different awesome product guys
GG
Great upgrade I love it
Thomas
Fits and works as described.
Douglas F.
Install was super easy. Truly a quality product!
Patrick L.
Awesome product, fast shipping and easy install
Trey j.
Love the extra pizzazz it adds lol. Just installed. Ready to test it out see how much it catches
Chris B.
Super easy to install
Steve H.
Nice piece very happy with my purchase. Order processing and shipping is next level fast.
Alberto O.
Happy with the products installing, went well and products are good quality material. Will recommend to make purchase’s at rpm Thankyou
Scott K.
Works perfectly. Installed below bed so wouldn’t have to mess with it taking bed in and out.
Brian P.
Rpm Products are the best!
Anthony M.
Easy to install, looks cool . Made of quality materials.
Jerrid R.
I wasn’t sure if I really needed it. But after my first ride I went to check if it actually had anything in it and was surprised how much it actually collected.
Thomas H.
Hoping to save the new turbo
Mike T.
Very easy install, high quality from silicone tube, aluminum can, filter, and pre filter. You can still take bed liner out I just disconnect the hose from the can. Works amazing, was surprised with how much it really catches. Very happy as usual with RPM products.
Mike A.
Easy install and looks great.
CHRIS R.
awesome product. easy install and works just as it should.
Mike T.
Just installed last week. Was very easy to install took about 45 mins from start to finish. Everything fits as advertised and the quality is second to none. Ran it for 130 miles and it works as advertised had about 1/2 a shot glass of oil, water that came out. Top notch products. Very pleased and I show everyone I see..
Justin M.
Awesome addition to my rzr love the stainless
Adam E.
Works as it should. Great quality!
Micah T.
To early to tell what it does but looks pretty cool lol
Robert T.
Catch cans are a must when it comes to turbo ha engines this is a great kit I do wish the supplied hose was long so I didn’t have to mount the catch can the the charge tray but other than that works great
zack R.
Quality at its finest! The hosing and fittings make the install very simple and very quick! Still no stickers to represent the great stuff they have!
Andrew B.
Everything is quality beside hose clamps that stripped out to tighten breather hose to motor. Had to use good Napa ones.
Travis F.
Fast shipping. Great looking product at a very fair price.
Robert W.
Awesome!! love it !!
Chris C.
Can is high quality nice welds comes with everything you need to install in most cases. I had (2) issues with mine (1) the can didn't fit my '21 XPT where the instructions have you locate it. I had to slide the can towards the rear a few inches and use a 1" spacer with a new bolt to mount it as the AN fitting hit my shock reservoir at full droop when jacked up, (2) the hose clamps included are less than Steller I replaced these immediately with my own clamps I learned this when I got my BOV that they were not that high of quality. I haven't tested it on a ride yet but you will get a vapor smell and steam/smoke from the filter with a hot engine as you are now venting these vapors to the atmosphere and not back into the engine. This will take some getting used to will see how it goes on the first couple rides.
Raymond A.
I like the looks of it and the easy install. However I'm not able to try it out yet because of weather.
Nate k.
SIMPLE INSTALL AND GREAT VALUE AND A MUST HAVE FOR ALL TURBO RZR'S
Frank S.
Easy and simple to install, save your intake on your side by side and install RPM oil catch can assembly.
Greg M.
I installed 1 on a turbo rzr and 1 on a rzr pro. On the turbo rzr, if I would of installed where your instructions show, it would of been behind the clutch intake tube. With no way to drain without removing the tube. I had to make another bracket so it would be past the tube. It is a lot better location.
Kenny R.
Everything went together well and fit and finish is nice.
Frankie T.
Good product
Conrad R.
Really easy install . And looks great !
David F.
Great!
Ryan K.
Fast shipping and the product looks and feels like a premium product.
Ron B.
Just got back from riding Drummin Island in the U P of Michigan and all of my R P M add ons worked awesome !!! Catch can , clutch blower , Big Fatty , Charge Tube , J Tube and pre screen for my air Filter
Phillip T.
The parts on the site were easy to find for my Razor. Received order very fast without any issues. Installed the parts with ease due to the easy to follow online videos. Will continue to look at RPM SXS site first for additional accessories for my Razor XP 4 Turbo!
Charles
High quality, easy install
Russell P.
I love the RPM catch can. Very easy to install. Works perfectly. I also run the BOV, charge tube, and J tube. Absolutely love them all
Carlos R.
Great product! Shipping was quick! Recommend this product! Well built!
Greg C.
Really nice unit. Easy install looks good on my machine. We will see how much junk I will catch in it.
Jeremy S.
Haven't been riding yet to cold for my kids to be out ripping trails. But so far pretty solid I would buy it again i can't give more on it until I put some miles on it this summer.
Jeremy
So far, it works great.
Collin
Came on time
Justin O.
Perfect fit and goes well with all the other rpm goodies !!
Chris J.
Awesome product the finishing was great got exactly what I wanted easy to install recommend for any turbo owners out there I did get the polished one to be a little different awesome product guys
GG
Great upgrade I love it
Thomas
Fits and works as described.
Douglas F.
Install was super easy. Truly a quality product!
Patrick L.
Awesome product, fast shipping and easy install
Trey j.
Love the extra pizzazz it adds lol. Just installed. Ready to test it out see how much it catches
Chris B.
Super easy to install
Steve H.
Nice piece very happy with my purchase. Order processing and shipping is next level fast.
Alberto O.
Happy with the products installing, went well and products are good quality material. Will recommend to make purchase’s at rpm Thankyou
Scott K.
Works perfectly. Installed below bed so wouldn’t have to mess with it taking bed in and out.
Brian P.
Rpm Products are the best!
Anthony M.
Easy to install, looks cool . Made of quality materials.
Jerrid R.
I wasn’t sure if I really needed it. But after my first ride I went to check if it actually had anything in it and was surprised how much it actually collected.
Thomas H.
Hoping to save the new turbo
Mike T.
Very easy install, high quality from silicone tube, aluminum can, filter, and pre filter. You can still take bed liner out I just disconnect the hose from the can. Works amazing, was surprised with how much it really catches. Very happy as usual with RPM products.
Mike A.
Easy install and looks great.
CHRIS R.
awesome product. easy install and works just as it should.
Mike T.
Just installed last week. Was very easy to install took about 45 mins from start to finish. Everything fits as advertised and the quality is second to none. Ran it for 130 miles and it works as advertised had about 1/2 a shot glass of oil, water that came out. Top notch products. Very pleased and I show everyone I see..
Justin M.
Awesome addition to my rzr love the stainless
Adam E.
Works as it should. Great quality!
Micah T.
To early to tell what it does but looks pretty cool lol
Robert T.
Catch cans are a must when it comes to turbo ha engines this is a great kit I do wish the supplied hose was long so I didn’t have to mount the catch can the the charge tray but other than that works great
zack R.
Quality at its finest! The hosing and fittings make the install very simple and very quick! Still no stickers to represent the great stuff they have!
Andrew B.
Everything is quality beside hose clamps that stripped out to tighten breather hose to motor. Had to use good Napa ones.
Travis F.
Fast shipping. Great looking product at a very fair price.
Robert W.
Awesome!! love it !!
Chris C.
Can is high quality nice welds comes with everything you need to install in most cases. I had (2) issues with mine (1) the can didn't fit my '21 XPT where the instructions have you locate it. I had to slide the can towards the rear a few inches and use a 1" spacer with a new bolt to mount it as the AN fitting hit my shock reservoir at full droop when jacked up, (2) the hose clamps included are less than Steller I replaced these immediately with my own clamps I learned this when I got my BOV that they were not that high of quality. I haven't tested it on a ride yet but you will get a vapor smell and steam/smoke from the filter with a hot engine as you are now venting these vapors to the atmosphere and not back into the engine. This will take some getting used to will see how it goes on the first couple rides.
Raymond A.
I like the looks of it and the easy install. However I'm not able to try it out yet because of weather.
Nate k.
SIMPLE INSTALL AND GREAT VALUE AND A MUST HAVE FOR ALL TURBO RZR'S
Frank S.
Easy and simple to install, save your intake on your side by side and install RPM oil catch can assembly.
Greg M.
I installed 1 on a turbo rzr and 1 on a rzr pro. On the turbo rzr, if I would of installed where your instructions show, it would of been behind the clutch intake tube. With no way to drain without removing the tube. I had to make another bracket so it would be past the tube. It is a lot better location.
Kenny R.
Everything went together well and fit and finish is nice.
