Description
RPM SxS Can-Am Maverick X3 Oil Catch Can
The RPM SxS Catch Can is all aluminum and fully chambered oil catch can built to provide the absolute best performance! Designed to mount directly to the chassis and use the factory ¾” crankcase breather hose to allow for a simple and quick install! A pre filter is included to keep dust and debris free from the crankcase breather filter as well. The use of our 12-AN fitting makes installation clean, and allows for easy removal for maintenance later on. Our o-ring sealed drain valve makes emptying the catch can easy and leak free during operation.
It's no secret that forced induction engines create an abundance of oil/gas/condensation waste. Due to emissions laws & such, this waste has to be recycled back through the engine & “burned off”. This oily mess is the “ messy film” you find caked to your charge tubes, turbo inducer blades, and inside the intercooler. Not only can these gasses and liquids create tuning headaches by skewing the air fuel ratio, they can also increase the chances of detonation ( oil & condensation do not combust well). The RPM SxS Catch Can’s job is to collect this oily mess so that it can be manually drained later on. All necessary hardware to cap off your factory breather & completely install the catch can are included!
Fits ALL models, years, and variants of the Maverick X3
Features
- Anodized OR Polished Finish
- Washable Filter
- Includes Pre Filter
- Lifetime Warranty
- Dual Interior Baffles
- Drip Free Tool-Less Drain Valve
- Uses Factory Crank Case Hose
- Aluminum Tig Welded Construction
- Easy & Straight Forward Installation & Instructions
- Fits all models, years, and variants of the Maverick X3
- Includes Silicone Cap For OEM Hose’s Location To Be Blocked Off
Awais Y.
Good
jay m.
Great product
Roger H.
Great looking and all the,right fittings to make the install easy. Packaged well and shipping was fast. Thanks guys!
Gavin
Works as designed and looks great.
Kyle H.
Great customer service fast shipping easy install all around great product and company just ordered the monster mouth cat delete pipe just need to get it installed
santo f.
Great quality, best fit!
Jeff H.
Great product and price! Installed on a 23' Can Am X3 Turbo RR with 816 miles.Installation was very easy with great instructions.Took it out for a 75 mile ride and was able to drain a substantial amount out of catch can.Cant believe without a catchcan this goes back into engine.A must have in my opinion in Northern Michigan where I ride!
Jeff H
Eric
Solid product. Easy to install.
Yan C.
Looks good and is easy to install
Yan C.
Looks great easy to install
Ryan
Fast delivery
Carlos M.
Great looking catch can and easy to install. Goes gteat with the other RPM parts too!
Ed M.
The cap to plug off the turbo inlet port could be made of better material for better fitment.
Jeff H.
Great quality, as is the case with all of the RPM products I’ve purchased. Bought the catch can in silver
JALIP H.
excellent quality and easy installation
Aaron G.
Very easy install, does what it should
Jason G.
Works great
Vern T.
Super simple install !! Looks awesome !! very happy with it. Thanks again great product
Eric B.
Great product, well made, does exactly what it's supposed to. Very easy installation. Highly recommend.
Bryan B.
Easy install, awesome quality.
Joe c.
really works and looks great.
Lance
Easy to install and works great!! You will be surprised how much condensation goes in the can and not in the motor now!
Clint A.
very nice looking quality built catch can. price point is good also compared to others on the market. very happy with it
Emanuelle V.
Work and look great
Alexander L.
Easy to install and looking great. Already after 50 miles, there was a small amount of water - oil Mix in the can.
Thank you RPM and greetings from Germany
cram l.
Mounts up nice, right hose size for stock hose, seems like a quality product. Havent really driven machine yet, but always had a catch can on turbo vehicles.
Bradley S.
Great price for a very nice part.
Eric P.
This is the second Catch-can I bought from Jason who is Awesome! I bought this one for my Son-n-Law who Loves it!!!! Save your Engine and get a catch-can!!!
Devon S.
Good quality item worked as expected.
Jakob G.
Works great super easy install but I stress of zipties I would use hose clamps
Darren F.
Easy install, Looks Sick !!! works great !!!
Daniel L.
Kick ass product! Install was easy! Great price point... keep up the great work and awesome products RPM!!! THANK YOU
Eric P.
The 3 Must have items from RPM is their Blow-off Valve, Clutch Fan Kit and their Catch-Can!!!
RPM Sells the Best products for ATV/UTV and Much More!!!!
Feliciano C.
Easy to install and it looks great!!!!
William D.
Is a simple bolt on, looks good and will save your turbo and intake from getting fouled with junk. Looks good too.
David
Great products but the drain valve is junk went to drain it after a long day of riding and it came apart otherwise great products
Jason N.
Great product with great craftsmanship easy install
kevin b.
Great product functional looks good easy to install what else can you say
Vicky C.
Its was i expected thanks you
Fabian G.
I really like this product I would definitely recommend it it would help with the life of your motor
Gilbert E.
Best thing ever for you engine
Jeffrey B.
Well designed. And quality piece
One suggestion show on your video exactly where the OEM vent hose is connected to turbo intake.
Overall very satisfied and my friends are buying them too!
Manuel A.
Works perfect
Customer
Ulta right on looked amazing
Dakotah S.
Easy install!
Billy B.
Nice well made
Dave D.
Don't pull the plug out of the turbo intake. PITA to get it back in! Otherwise it would have been a easy install.
Jovani R.
Easy install
Kevin W.
I changed the mount location to passenger side upper roll bar for mud and water rides. Factory hose fits perfect.
RPM makes a nice quality product.
John E.
Easy to fit and looks great
Andres E.
Easy to install and pit together, glad I got it, dint want oil bursting out of my blow off valve onto my turbo and having that burnt smell. It gives me a more sense of a rich clean engine exhaust fumes.
Justin R.
Excellent edition to my x3, the craftsmanship of the can is perfect. Easy install only took a couple minutes. I love how RPM actually sends everything you need for install even got a few zip ties!
Herbert P.
Good
Cameron N.
Super easy install ,amazing quality and I feel so much better not having all that gunk going back inside my turbo. 10/10 recommend.
Colby W.
Well built and easy install
Todd S.
Real nice stuff with the oil catch can. Fit and finish is great. Looks cool too.
Henry H.
Was easy to install and just waiting to see how it works.
George G.
Easy to install and the products works great.
Joseph D.
Works great looks good easy install great product over all need to try the charge tubs and recirculating valve next
Awais Y.
Good
jay m.
Great product
Roger H.
Great looking and all the,right fittings to make the install easy. Packaged well and shipping was fast. Thanks guys!
Gavin
Works as designed and looks great.
Kyle H.
Great customer service fast shipping easy install all around great product and company just ordered the monster mouth cat delete pipe just need to get it installed
santo f.
Great quality, best fit!
Jeff H.
Great product and price! Installed on a 23' Can Am X3 Turbo RR with 816 miles.Installation was very easy with great instructions.Took it out for a 75 mile ride and was able to drain a substantial amount out of catch can.Cant believe without a catchcan this goes back into engine.A must have in my opinion in Northern Michigan where I ride!
Jeff H
Eric
Solid product. Easy to install.
Yan C.
Looks good and is easy to install
Yan C.
Looks great easy to install
Ryan
Fast delivery
Carlos M.
Great looking catch can and easy to install. Goes gteat with the other RPM parts too!
Ed M.
The cap to plug off the turbo inlet port could be made of better material for better fitment.
Jeff H.
Great quality, as is the case with all of the RPM products I’ve purchased. Bought the catch can in silver
JALIP H.
excellent quality and easy installation
Aaron G.
Very easy install, does what it should
Jason G.
Works great
Vern T.
Super simple install !! Looks awesome !! very happy with it. Thanks again great product
Eric B.
Great product, well made, does exactly what it's supposed to. Very easy installation. Highly recommend.
Bryan B.
Easy install, awesome quality.
Joe c.
really works and looks great.
Lance
Easy to install and works great!! You will be surprised how much condensation goes in the can and not in the motor now!
Clint A.
very nice looking quality built catch can. price point is good also compared to others on the market. very happy with it
Emanuelle V.
Work and look great
Alexander L.
Easy to install and looking great. Already after 50 miles, there was a small amount of water - oil Mix in the can.
Thank you RPM and greetings from Germany
cram l.
Mounts up nice, right hose size for stock hose, seems like a quality product. Havent really driven machine yet, but always had a catch can on turbo vehicles.
Bradley S.
Great price for a very nice part.
Eric P.
This is the second Catch-can I bought from Jason who is Awesome! I bought this one for my Son-n-Law who Loves it!!!! Save your Engine and get a catch-can!!!
Devon S.
Good quality item worked as expected.
Jakob G.
Works great super easy install but I stress of zipties I would use hose clamps
Darren F.
Easy install, Looks Sick !!! works great !!!
Daniel L.
Kick ass product! Install was easy! Great price point... keep up the great work and awesome products RPM!!! THANK YOU
Eric P.
The 3 Must have items from RPM is their Blow-off Valve, Clutch Fan Kit and their Catch-Can!!!
RPM Sells the Best products for ATV/UTV and Much More!!!!
Feliciano C.
Easy to install and it looks great!!!!
William D.
Is a simple bolt on, looks good and will save your turbo and intake from getting fouled with junk. Looks good too.
David
Great products but the drain valve is junk went to drain it after a long day of riding and it came apart otherwise great products
Jason N.
Great product with great craftsmanship easy install
kevin b.
Great product functional looks good easy to install what else can you say
Vicky C.
Its was i expected thanks you
Fabian G.
I really like this product I would definitely recommend it it would help with the life of your motor
Gilbert E.
Best thing ever for you engine
Jeffrey B.
Well designed. And quality piece
One suggestion show on your video exactly where the OEM vent hose is connected to turbo intake.
Overall very satisfied and my friends are buying them too!
Manuel A.
Works perfect
Customer
Ulta right on looked amazing
Dakotah S.
Easy install!
Billy B.
Nice well made
Dave D.
Don't pull the plug out of the turbo intake. PITA to get it back in! Otherwise it would have been a easy install.
Jovani R.
Easy install
Kevin W.
I changed the mount location to passenger side upper roll bar for mud and water rides. Factory hose fits perfect.
RPM makes a nice quality product.
John E.
Easy to fit and looks great
Andres E.
Easy to install and pit together, glad I got it, dint want oil bursting out of my blow off valve onto my turbo and having that burnt smell. It gives me a more sense of a rich clean engine exhaust fumes.
Justin R.
Excellent edition to my x3, the craftsmanship of the can is perfect. Easy install only took a couple minutes. I love how RPM actually sends everything you need for install even got a few zip ties!
Herbert P.
Good
Cameron N.
Super easy install ,amazing quality and I feel so much better not having all that gunk going back inside my turbo. 10/10 recommend.
Colby W.
Well built and easy install
Todd S.
Real nice stuff with the oil catch can. Fit and finish is great. Looks cool too.
Henry H.
Was easy to install and just waiting to see how it works.
George G.
Easy to install and the products works great.
Joseph D.
Works great looks good easy install great product over all need to try the charge tubs and recirculating valve next