Fits great much better than stock hose.
RPM Gen 4 Ski-Doo / Lynx 850 Turbo Silicone Charge & Intake Tube 6-Ply Extreme HD
Set the benchmark for alpine performance and bulletproof reliability with RPM’s Heavy-Duty 6-Ply Silicone Charge and Intake Tube Kit for Ski-Doo and Lynx 850 Turbo models! While factory rubber tubes are notorious for swelling, cracking, and blowing out—ruining high-country powder days even on stock machines—RPM engineered an uncompromising 6-ply solution built to withstand extreme boost pressures and frigid mountain environments.
Unlike thin 4-ply competitor offerings that suffer from awkward routing and tight steering clearance, RPM spent extensive R&D optimizing tube geometry. By dramatically increasing overall internal volume, this kit lowers Intake Air Temperatures (IAT) and smoothes airflow into the engine while guaranteeing zero interference with the steering stem's full range of motion.
Designed with ultimate versatility in mind, the charge tube features an integrated 25mm BOV port to seamlessly accept the RPM Blow-Off Valve (a billet 25mm plug is included for non-BOV setups), as well as a dedicated boost reference/accessory port for hookup to boost gauges or pressure-activated switches. Every kit ships complete with heavy-duty rolled-edge worm gear clamps that secure firmly without cutting or slicing into the silicone material.
Industry-Leading 6-Ply Construction: Built from extra-thick 6-ply reinforced silicone that will not expand, collapse, or blow out under high boost levels.
Maximizes Airflow Volume & Lowers IATs: Expanded tube diameter increases total charge air volume to deliver cooler, denser intake air for maximum horsepower.
Uncompromised Steering Stem Clearance: Precision-molded contours provide maximum internal airflow while maintaining full clearance for steering stem rotation.
Integrated 25mm BOV Port: Includes a built-in 25mm port ready to accept the RPM Blow-Off Valve (includes a 25mm billet aluminum block-off plug if running without a BOV).
Dedicated Boost Reference Port: Pre-formed port provides an easy, secure connection point for boost gauges, data loggers, or auxiliary boost accessories.
Rolled-Edge Heavy-Duty Clamps: Ships with premium stainless steel worm gear clamps featuring smooth, rolled edges that protect the silicone from cutting or fraying.
Essential Reliability Upgrade: Replaces failure-prone factory rubber boots to eliminate sudden boost leaks on stock or high-boost tuned machines.
(1) RPM SXS 6-Ply Heavy-Duty Silicone Upper Charge Tube
(1) RPM SXS 6-Ply Heavy-Duty Silicone Intake Tube
(1) 25mm Billet Aluminum BOV Block-Off Plug (Pre-installed or included for non-BOV setups)
(1) Complete Set of Heavy-Duty Rolled-Edge Stainless Steel Clamps
Fits all Gen 4 and Gen 5 Ski-Doo and Lynx 850 Turbo snowmobile models:
Ski-Doo 850 E-TEC Turbo / Turbo R (Gen 4 & Gen 5 Chassis): All Models & Trims
Lynx 850 E-TEC Turbo / Turbo R (Gen 4 & Gen 5 Chassis): All Models & Trims
All orders typically ship within 2-4 business days of order being placed. Weekends, holidays, and weather may slow fulfillment down on order processing. Unless otherwise noted, backordered items will ship according to their estimated shipping times.
Overall rating: 4.9 / 5 from 28 reviews.
Fits great much better than stock hose.
Robert C. 5/5 Verified
RPM Gen 4 Ski-Doo / Lynx 850 Turbo Silicone Charge & Intake Tube 6-Ply Extreme HD
Install wasnt to bad results were beyond expected sounds great with bov and definitely getting good for flow highly recommend!
Casey L. 5/5
Ski-Doo / Lynx 850 Turbo Gen 4 & 5 Silicone Charge & Intake Tube 6-Ply Extreme HD
Absolutely amazing fit and durable compared to factory hoses
Blake G. 5/5 Verified
Ski-Doo / Lynx 850 Turbo Gen 4 & 5 Silicone Charge & Intake Tube 6-Ply Extreme HD
I’ve ordered this for my 2021 skidoo and very happy with the quality and ease of installation. Now I hav it on my new 2024 freeride thank guy for such a awesome product
Donald L. 5/5 Verified
Ski-Doo / Lynx 850 Turbo Gen 4 & 5 Silicone Charge & Intake Tube 6-Ply Extreme HD
Well made product
Sean M. 5/5 Verified
Ski-Doo 850 Turbo Gen 4 & 5 Silicone Charge & Intake Tube 6-Ply Extreme HD
Quick and easy to mount, and a perfect fit👍🏻
Glenn Audun S. 5/5 Verified
Ski-Doo 850 Turbo Gen 4 & 5 Silicone Charge & Intake Tube 6-Ply Extreme HD
Great fit and finish, much thicker than stock tube, a little tight getting it in place but not to bad, clamps were both perfect size. Would definitely recommend
Eric H. 5/5 Verified
Ski-Doo 850 Turbo Gen 4 & 5 Silicone Charge & Intake Tube ( 6-Ply Extreme HD )
Kit installed easily and blow off from RPM installed as well. Excellent product and install instructions. Highly recommend!
Matthew T. 5/5 Verified
Ski-Doo 850 Turbo Gen 4 & 5 Silicone Charge & Intake Tube ( 6-Ply Extreme HD )
Great product and company. Thanks for the quick turnaround!!
Scott K. 5/5 Verified
Ski-Doo 850 Turbo Gen 4 & 5 Silicone Charge & Intake Tube ( 6-Ply Extreme HD )
Installation can be a bit difficult just because of the tight area but my sled definitely rips and I’m not worried at all about popping the charge tube with this heavy duty thickkk mama
Mccoy L. 5/5 Verified
Ski-Doo 850 Turbo Gen 4 Silicone Charge & Intake Tube ( 6-Ply Extreme HD )
Very high quality product and a relatively easy install! Can’t wait to try it out on the snow!
Rockwell J. 5/5 Verified
Ski-Doo 850 Turbo Silicone Charge & Intake Tube ( 6-Ply Extreme HD )
It is a little bit of a pain to put on and the neck for the hood intake doesn’t line up great but it sounds great!
Andrew M. 5/5 Verified
Ski-Doo 850 Turbo Silicone Charge & Intake Tube ( 6-Ply Extreme HD )
Itll be a great setup
Jacob W. 5/5 Verified
RPM Gen 4 Ski-Doo / Lynx 850 Turbo Silicone Charge & Intake Tube 6-Ply Extreme HD
Great customer service
Anthony C. 5/5 Verified
RPM Gen 4 Ski-Doo / Lynx 850 Turbo Silicone Charge & Intake Tube 6-Ply Extreme HD
Fit nicely, easy install.
Jesse R. 5/5 Verified
RPM Gen 4 Ski-Doo / Lynx 850 Turbo Silicone Charge & Intake Tube 6-Ply Extreme HD
It takes some work to get the airbox into the intake opening, but other than that I am happy with the product.
Michael P. 4/5 Verified
RPM Gen 4 Ski-Doo / Lynx 850 Turbo Silicone Charge & Intake Tube 6-Ply Extreme HD
Pretty quick shipping everything was there a little challenging to install, but after I got it done, everything worked perfect
Johnny K. 5/5 Verified
RPM Gen 4 Ski-Doo / Lynx 850 Turbo Silicone Charge & Intake Tube 6-Ply Extreme HD
Great product and fast shipping.
Brian W. 5/5 Verified
RPM Gen 4 Ski-Doo / Lynx 850 Turbo Silicone Charge & Intake Tube 6-Ply Extreme HD
Works great, improved throttle response and made turbo flutter disappear. Works great!
Brian W. 5/5 Verified
RPM Gen 4 Ski-Doo / Lynx 850 Turbo Silicone Charge & Intake Tube 6-Ply Extreme HD
Very heavy duty and tight fitting. Far superior to factory piping.
Travis H. 5/5 Verified
RPM Gen 4 Ski-Doo / Lynx 850 Turbo Silicone Charge & Intake Tube 6-Ply Extreme HD
Parts came fast and were very well packaged. The hoses fit perfectly and are much stronger than stock gives me a lot more piece of mind that I wont tear a hose in the backcountry. I would recommend these even on a stock sled.
Donald P. 5/5 Verified
Ski-Doo 850 Turbo Gen 4 & 5 Silicone Charge & Intake Tube 6-Ply Extreme HD
Easy to install
Kouzou S. 5/5 Verified
Ski-Doo 850 Turbo Gen 4 & 5 Silicone Charge & Intake Tube ( 6-Ply Extreme HD )
Great product A little tight for post forward kit
Cory R. 4/5 Verified
Ski-Doo 850 Turbo Silicone Charge & Intake Tube ( 6-Ply Extreme HD )
Great fitment. Great quality. Installation would only go smoother if hose clamp on airbox side was 1/2” longer.
Dustin W. 5/5 Verified
Ski-Doo 850 Turbo Silicone Charge & Intake Tube ( 6-Ply Extreme HD )
This POV is a total gain changer. That turbo stays spooled up for very fast throttle response it is awesome. Installation is not too bad.
Tom V. 5/5 Verified
Ski-Doo 850 Turbo Silicone Charge & Intake Tube ( 6-Ply Extreme HD )
What a pain to get the hose clamp started. Hopefully you supply a clamp just 1/2" longer for future purchases.
Chuck H. 4/5 Verified
Ski-Doo 850 Turbo Silicone Charge & Intake Tube ( 6-Ply Extreme HD )
Have a buddy help you, would make it easier to install
Howard P. 5/5 Verified
Ski-Doo 850 Turbo Silicone Charge & Intake Tube ( 6-Ply Extreme HD )
Fit and finish was as expected. Very nice and quality materials used. One clamp was just a hair small which made it a pain to get it to connect. I didn't install the BOV yet because I didn't know the benefits or want to permanently modify my sled. Does it void the warranty?
Korey M. 4/5 Verified
Ski-Doo 850 Turbo Silicone Charge & Intake Tube ( 6-Ply Extreme HD )
This category doesn't include any parts listed as fitting this machine. Other categories may have parts that fit — try browsing all products or a different category.
Free shipping over $200.00