RPM Billet "Enfriador" P90x Tapa de Embrague / Refuerzo RZR Pro XP, Turbo R, Pro S, Pro R
$164.95
Tapa/refuerzo de embrague "Cooler" P90x de RPM Billet
Mecanizado a partir de aluminio billet 6061, nuestro refuerzo de embrague P90x está diseñado para una resistencia pura sin añadir peso innecesario. Además de ser sustancialmente más fuerte que la débil pieza de fundición original, integramos refuerzos elevados para aumentar el flujo de aire (CFM). ¡Esencialmente, hemos convertido la tapa del refuerzo del embrague en un ventilador reforzado! Este aumento en el movimiento del aire del embrague ayuda a reducir la temperatura de la correa, aumentando la vida útil de la misma. El embrague P90x no es un embrague perezoso y es un gran embrague, esto simplemente aborda el punto débil de ese embrague, que es la flexión lateral y hacia afuera de las torres del embrague. Otro problema común con el diseño de fábrica es que el buje se sale del refuerzo; hemos mecanizado un labio de retención del buje en nuestro refuerzo que no permitirá que esto suceda.
Características clave~
Refuerza el embrague primario y añade resistencia
Anodizado negro para mayor resistencia y protección contra la corrosión
Mecanizado CNC de aluminio billet 6061
Buje sin aceite preinstalado
Aspas de ventilador integradas
Labio de retención del buje
Fácil instalación atornillada
Compatibilidad~ 2025-2026 Polaris Pro S 2022-2026 Polaris RZR Pro R 2022-2026 Polaris RZR Turbo R 2020-2024 Polaris RZR Pro XP 2021-24 RZR XP Turbo/S
**NO ES COMPATIBLE CON los modelos RZR Turbo XPT y S 2016-2020**
Todos los pedidos se envían normalmente en un plazo de 2 a 4 días hábiles desde la realización del pedido. Los fines de semana, los días festivos y las condiciones meteorológicas pueden retrasar el cumplimiento en el procesamiento de pedidos. A menos que se indique lo contrario, los artículos pendientes de reabastecimiento se enviarán de acuerdo con sus tiempos de envío estimados.
Shipping was fast, price was awesome, and felt like a quality item. Time will tell if it’s a true quality item but so far the all the products I’ve received from RPM have been great.
Perfect! RPM always does a great job! Picked up the titanium bolts as well. Order from them many times and very consistent and Incredible customer service. Fast shipping
Easy way to add support to my primary clutch. I installed it without having to remove clutch . I hand loosened all six bolts . Then used small impact to remove three . Then removed last three little bit at a time until clutch cover came off . I pushed RPM new billet cover on with a little pressure and had some one help hand tighten three bolts on . After that I hand tighten the last 3 bolts then tighten all bolts little bit at a time without over tighten. Then hand torque to spec . I also used lock tight on bolts , because I notice they had some from factory.
Quick to ship easy install, absolutely perfect fit and finish. I run almost all of RPM's product on my 2022 xp pro and I have never had an issue with anything. Highly recommend this product over stock any day of the week.
High quality, adds strength, helps air flow, and as usual from RPM looks amazing. Now I can open her up more with peace of mind. Great company fast delivery never had a single issue with any of there products. 2022 xp pro
Super easy to install, even by myself with the clutch on the machine. Looks like it’s very well made. As a couple others have mentioned, at idle I can faintly hear it rubbing the clutch cover, but it goes away when the rpm’s are slightly increased.
Good quality cover and the fact that it reinforces the clutch while also working as a fan is a plus. Not only does it perform well, it looks incredible and with billet , you can never go wrong.
So I have a 2024 pro XP I install the clutch brace looks great, but once I put the plastic cover back on, it was hitting the cover. I did grind down the plastic a little bit to see if that helps did not help I had to grind the aluminum brace down to get it to stop hitting the cover. so I don’t know if it’s the powder coating or the brace is a little too thick at the top where it gets close to the plastic but I did have to grind it quite a bit off there to get it to stop hitting.
Super easy to install! Way stronger and better looking than factory. A little pricey in my opinion. I worked in a machine shop. BUT If you putt around you don’t need it…but if you run hard? Probably should have this especially with Polaris being sketchy on clutch issues or any issues for that matter. Definitely top notch part.
This category doesn't include any parts listed as fitting this machine. Other categories may have parts that fit — try browsing all products or a different category.
Envío gratis desde $200.00
RPM Billet "Enfriador" P90x Tapa de Embrague / Refuerzo RZR Pro XP, Tu
