RPM Billet " Cooler " P90x Clutch Cover / Brace RZR Pro XP, Turbo R, Pro S, Pro R
$164.95
RPM Billet " Cooler " P90x Clutch Cover / Brace
Machined from 6061 billet, our P90x clutch brace is built for pure strength without adding unneeded weight. In addition to being substantially stronger than the stock weak cast piece, we integrated raised braces to increase CFM Air Flow. Essentially we have turned the clutch brace cover into a reinforced fan! This increase in clutch air movement helps reduce belt temperature increasing belt life. The P90x clutch is no slouch and a great clutch, this simply addresses the weak spot of that clutch which is the side to side AND outward flex of the clutch towers. Another common issue with the factory design is the bushing will walk outward out of the brace, have machined a bushing retention lip into our brace that will not allow this to happen.
Key Features~
Reinforces Primary & Adds Strength
Anodized Black For Strength & Corrosion Protection
CNC Machined 6061 Billet
Pre Installed Oil-Less Bushing
Integrated Fan Blades
Bushing Retention Lip
Simple Bolt On Installation
Fitment~ 2025-2026 Polaris Pro S 2022-2026 Polaris RZR Pro R 2022-2026 Polaris RZR Turbo R 2020-2024 Polaris RZR Pro XP 2021-24 RZR XP Turbo/S
**DOES NOT FIT 2016-2020 RZR Turbo XPT & S Models**
All orders typically ship within 2-4 business days of order being placed. Weekends, holidays, and weather may slow fulfillment down on order processing. Unless otherwise noted, backordered items will ship according to their estimated shipping times.
Shipping was fast, price was awesome, and felt like a quality item. Time will tell if it’s a true quality item but so far the all the products I’ve received from RPM have been great.
Perfect! RPM always does a great job! Picked up the titanium bolts as well. Order from them many times and very consistent and Incredible customer service. Fast shipping
Easy way to add support to my primary clutch. I installed it without having to remove clutch . I hand loosened all six bolts . Then used small impact to remove three . Then removed last three little bit at a time until clutch cover came off . I pushed RPM new billet cover on with a little pressure and had some one help hand tighten three bolts on . After that I hand tighten the last 3 bolts then tighten all bolts little bit at a time without over tighten. Then hand torque to spec . I also used lock tight on bolts , because I notice they had some from factory.
Quick to ship easy install, absolutely perfect fit and finish. I run almost all of RPM's product on my 2022 xp pro and I have never had an issue with anything. Highly recommend this product over stock any day of the week.
High quality, adds strength, helps air flow, and as usual from RPM looks amazing. Now I can open her up more with peace of mind. Great company fast delivery never had a single issue with any of there products. 2022 xp pro
Super easy to install, even by myself with the clutch on the machine. Looks like it’s very well made. As a couple others have mentioned, at idle I can faintly hear it rubbing the clutch cover, but it goes away when the rpm’s are slightly increased.
Good quality cover and the fact that it reinforces the clutch while also working as a fan is a plus. Not only does it perform well, it looks incredible and with billet , you can never go wrong.
So I have a 2024 pro XP I install the clutch brace looks great, but once I put the plastic cover back on, it was hitting the cover. I did grind down the plastic a little bit to see if that helps did not help I had to grind the aluminum brace down to get it to stop hitting the cover. so I don’t know if it’s the powder coating or the brace is a little too thick at the top where it gets close to the plastic but I did have to grind it quite a bit off there to get it to stop hitting.
Super easy to install! Way stronger and better looking than factory. A little pricey in my opinion. I worked in a machine shop. BUT If you putt around you don’t need it…but if you run hard? Probably should have this especially with Polaris being sketchy on clutch issues or any issues for that matter. Definitely top notch part.
This category doesn't include any parts listed as fitting this machine. Other categories may have parts that fit — try browsing all products or a different category.
Free shipping over $200.00
RPM Billet " Cooler " P90x Clutch Cover / Brace RZR Pro XP, Turbo R, P
