Need to stretch you mileage on your X3? Finding that sport mode consumes more fuel than you thought but cant stand the idea of not being able to ride hard all day as hard as you want due to running out of fuel?! RPM Has you covered with their Can-Am X3 4.5 Gallon Auxiliary Fuel Tanks! You have the ability to run either side or BOTH tanks adding a total of 9 Gallons of added fuel capacity alleviates the concern of fuel consumption during your multi day trips, Baja pre running, or all day dune rip sessions. At the push of a switch you can refill the factory tank at 1.3+GPM. The RPM Auxiliary Tank is a none invasive installation which means NO chassis modifications, NO crazy bracketry, & NO cutting or welding. Mounted low in the chassis under the factory seats, & at the lowest points possible allows for a well balanced car eliminating the feel of "roll" when steering in high speed corners. Included with every tank is a plug and play wiring harness complete with a momentary switch. This switch allows you to be worry free of accidentally turning on, or leaving your pumps activated and running. One switch controls multiple tanks alleviating any unneeded wiring.
RPM tanks, unlike other dangerous designs, utilize the factory tip over check valve. In the unfortunate case of a rollover, the RPM tanks would not be able to leak fuel creating a dangerous situation. This is done by the use of the factory breather system. Overfilling the factory tank is often a concern, but with RPM's unique set up, the OEM tank could reach maximum capacity and all of the excess fuel would simply be circumvented back to the auxiliary tanks, leaving your riding adventures worry free.
RPM Auxiliary fuel tanks are purchased as two separate tanks that are "per side" allowing you to run just 1 or both tanks. This also allows for the tanks AND fuel lines to be clear from being near, above, or bellow any of the rotating drivetrain. The construction of these tanks is 6mm thick RotoMolded seamless plastic, this is about 3x thicker than a factory fuel tank. Unlike the industry standard of cheap brass fittings molded into the tanks, we spared none and stainless fittings are standard with all of RPM's RotoMolded tanks.
Fits ALL Years & Models Of Can-Am X3's, (Front Seats Only On 4 Seat Models)
4.5 Gallon Capacity Per Side
Includes ALL Hardware, Fittings, Fuel Line, & Pump
Plug & Play Harness With Momentary Toggle
6mm Thick RotoMolded Seamless Construction ( 3x+Thicker Than OEM Tanks )
Stainless Mounting Hardware Within The RotoMolded Construction
Billet Aluminum Gas Cap
Have a buddy who doesn't have an RPM Auxiliary fuel tank? Worry no more, with the RPM Fill A Buddy.
Share
GUY R.
tip top parfait
john s.
It is wonderful to have an additional 9 Gal of fuel. Tanks fit beautifully under the seats which previously was wasted space. O ring on one cap leaked and was promptly replaced by RPM.
GUY R.
tip top parfait
john s.
It is wonderful to have an additional 9 Gal of fuel. Tanks fit beautifully under the seats which previously was wasted space. O ring on one cap leaked and was promptly replaced by RPM.